100G Coherent Muxponder, 2×10×10G to 2×100G (QSFP28/QSFP-DD) for DCI Chassis
This 100G coherent muxponder service card maps twenty 10G-class client signals onto two independent OTU4 line signals for full capacity, or ten client signals onto one OTU4 line signal with intra-board 1+1 protection. The line side takes QSFP28 grey or QSFP-DD DCO modules; the two-slot card fits the OTN DCI platform range.
Highlights
Two working modes
Runs as 20×10G to 2×OTU4 for maximum capacity, or as 10×10G to 1×OTU4 with intra-board 1+1 protection, trading capacity for resilience.
Grey or coherent line optics
Two QSFP28/QSFP-DD line ports accept grey QSFP28 modules for shorter reach or QSFP-DD DCO modules with C-band tunability (191.3–196.1 THz).
Broad 10G-class service support
Twenty hot-swappable SFP+ client ports carry 10GbE, 25GbE, STM-64, 10GbE_WAN, Fibre Channel up to 3200, and OTU2/OTU2e.
Deep performance visibility
Monitors line- and client-side performance and alarms, Ethernet RMON, optical-module health, ODU-layer delay measurement, and telemetry.
High client-port density
Twenty hot-swappable client ports on a two-slot card, drawing under 116 W with both optical modules fitted.
Functional Structure
Mode 120×10G to 2×OTU4 mode (full capacity, two independent line channels, no protection)
Mode 210×10G to 1×OTU4 mode (intra-board 1+1 protection: the second line port carries a protected copy of the same OTU4 signal instead of independent capacity)
Format
Specifications
| Interfaces | 2 × QSFP28/QSFP-DD, pluggable (grey QSFP28 or DCO coherent module) |
| Line Rate | 100G per port (OTU4) |
| Tunable Range | 191.3–196.1 THz, C-band (DCO optical module) |
| Interfaces | 20 × SFP+, hot-swappable |
| Supported Services | 10GbE, 25GbE, STM-64, 10GbE_WAN, Fibre Channel 800/1600/3200, OTU2, OTU2e |
| Working Mode | 20×10G Any to 2×OTU4 · or 10×10G Any to 1×OTU4 (intra-board 1+1 protection) |
| Latency Measurement | Online delay measurement based on the ODU layer, line-side |
| Loopback | Inner and outer loopback, line-side and client-side |
| LLDP | Receive mode only, Ethernet service types |
| ALS | Client-side support, non-OTN service types |
| Intra-Board 1+1 Protection | Supported in 10×10G Any to 1×OTU4 working mode |
| Performance Monitoring | Line- and client-side performance and alarm monitoring, Ethernet RMON, optical-module temperature/current/voltage/power, telemetry |
| Slots Occupied | 2 (compatible with the OTN DCI platform range) |
| Maximum Power Consumption | < 116 W (typical) |
Ordering Information
| Name | 100G Coherent Muxponder, 2×10×10G to 2×100G (QSFP28/QSFP-DD) for DCI Chassis |
| Description | 100G coherent muxponder card, 2 slots. Maps twenty 10G-class client services (20x SFP+ ports) onto two independent OTU4 line signals for full capacity, or ten clients onto one OTU4 line signal with intra-board 1+1 protection; line side takes QSFP28 grey or QSFP-DD DCO modules with C-band tunability; supports 10GbE, 25GbE, STM-64, Fibre Channel and OTU2/OTU2e services. |
| Part Number | DCI-MP-QDD-2x100G-20x10G-2S |
Netceed