100G Coherent Muxponder, 2×10×10G to 2×100G (QSFP28/QSFP-DD) for DCI Chassis
This 100G coherent muxponder service card maps twenty 10G-class client signals onto two independent OTU4OTU4: Optical channel Transport UnitOTN framing level defined by ITU-T G.709 (OTU2 about 10.7G, OTU4 about 112G), with error correction and management overhead. line signals for full capacity, or ten client signals onto one OTU4OTU4: Optical channel Transport UnitOTN framing level defined by ITU-T G.709 (OTU2 about 10.7G, OTU4 about 112G), with error correction and management overhead. line signal with intra-board 1+1 protection. The line side takes QSFP28 grey or QSFP-DD DCODCO: Digital Coherent OpticsPluggable coherent module (e.g. CFP2-DCO) that embeds the coherent DSP. modules; the two-slot card fits the OTN DCI platform range.
Highlights
Two working modes
Runs as 20×10G to 2×OTU4OTU4: Optical channel Transport UnitOTN framing level defined by ITU-T G.709 (OTU2 about 10.7G, OTU4 about 112G), with error correction and management overhead. for maximum capacity, or as 10×10G to 1×OTU4OTU4: Optical channel Transport UnitOTN framing level defined by ITU-T G.709 (OTU2 about 10.7G, OTU4 about 112G), with error correction and management overhead. with intra-board 1+1 protection, trading capacity for resilience.
Grey or coherent line optics
Two QSFP28/QSFP-DD line ports accept grey QSFP28 modules for shorter reach or QSFP-DD DCODCO: Digital Coherent OpticsPluggable coherent module (e.g. CFP2-DCO) that embeds the coherent DSP. modules with C-band tunability (191.3–196.1 THz).
Broad 10G-class service support
Twenty hot-swappable SFP+ client ports carry 10GbE, 25GbE, STMSTM: Synchronous Transport ModuleSDH rate levels: STM-1 155M, STM-4 622M, STM-16 2.5G, STM-64 10G.-64, 10GbE_WAN, Fibre Channel up to 3200, and OTU2OTU2: Optical channel Transport UnitOTN framing level defined by ITU-T G.709 (OTU2 about 10.7G, OTU4 about 112G), with error correction and management overhead./OTU2eOTU2e: Optical channel Transport UnitOTN framing level defined by ITU-T G.709 (OTU2 about 10.7G, OTU4 about 112G), with error correction and management overhead..
Deep performance visibility
Monitors line- and client-side performance and alarms, Ethernet RMONRMON: Remote Network MonitoringStandard for collecting Ethernet statistics (traffic, errors, frame sizes) remotely., optical-module health, ODUODU: Optical Data UnitOTN container that carries the client signal inside the OTU frame.-layer delay measurement, and telemetry.
High client-port density
Twenty hot-swappable client ports on a two-slot card, drawing under 116 W with both optical modules fitted.
Functional Structure
Mode 120×10G to 2×OTU4OTU4: Optical channel Transport UnitOTN framing level defined by ITU-T G.709 (OTU2 about 10.7G, OTU4 about 112G), with error correction and management overhead. mode (full capacity, two independent line channels, no protection)
Mode 210×10G to 1×OTU4OTU4: Optical channel Transport UnitOTN framing level defined by ITU-T G.709 (OTU2 about 10.7G, OTU4 about 112G), with error correction and management overhead. mode (intra-board 1+1 protection: the second line port carries a protected copy of the same OTU4OTU4: Optical channel Transport UnitOTN framing level defined by ITU-T G.709 (OTU2 about 10.7G, OTU4 about 112G), with error correction and management overhead. signal instead of independent capacity)
Front Panel
Format
Specifications
Line Side
Interfaces
2 × QSFP28/QSFP-DD, pluggable (grey QSFP28 or DCODCO: Digital Coherent OpticsPluggable coherent module (e.g. CFP2-DCO) that embeds the coherent DSP. coherent module)
Line Rate
100G per port (OTU4OTU4: Optical channel Transport UnitOTN framing level defined by ITU-T G.709 (OTU2 about 10.7G, OTU4 about 112G), with error correction and management overhead.)
Tunable Range
191.3–196.1 THz, C-band (DCODCO: Digital Coherent OpticsPluggable coherent module (e.g. CFP2-DCO) that embeds the coherent DSP. optical module)
Client Side
Interfaces
20 × SFP+, hot-swappable
Supported Services
10GbE, 25GbE, STMSTM: Synchronous Transport ModuleSDH rate levels: STM-1 155M, STM-4 622M, STM-16 2.5G, STM-64 10G.-64, 10GbE_WAN, Fibre Channel 800/1600/3200, OTU2OTU2: Optical channel Transport UnitOTN framing level defined by ITU-T G.709 (OTU2 about 10.7G, OTU4 about 112G), with error correction and management overhead., OTU2eOTU2e: Optical channel Transport UnitOTN framing level defined by ITU-T G.709 (OTU2 about 10.7G, OTU4 about 112G), with error correction and management overhead.
Working Mode
20×10G Any to 2×OTU4OTU4: Optical channel Transport UnitOTN framing level defined by ITU-T G.709 (OTU2 about 10.7G, OTU4 about 112G), with error correction and management overhead. · or 10×10G Any to 1×OTU4OTU4: Optical channel Transport UnitOTN framing level defined by ITU-T G.709 (OTU2 about 10.7G, OTU4 about 112G), with error correction and management overhead. (intra-board 1+1 protection)
OAM & Monitoring
Latency Measurement
Online delay measurement based on the ODUODU: Optical Data UnitOTN container that carries the client signal inside the OTU frame. layer, line-side
Loopback
Inner and outer loopback, line-side and client-side
LLDP
Receive mode only, Ethernet service types
ALSALS: Automatic Laser ShutdownLaser safety feature that switches the laser off when the incoming signal is lost.
Client-side support, non-OTN service types
Intra-Board 1+1 Protection
Supported in 10×10G Any to 1×OTU4OTU4: Optical channel Transport UnitOTN framing level defined by ITU-T G.709 (OTU2 about 10.7G, OTU4 about 112G), with error correction and management overhead. working mode
Performance Monitoring
Line- and client-side performance and alarm monitoring, Ethernet RMONRMON: Remote Network MonitoringStandard for collecting Ethernet statistics (traffic, errors, frame sizes) remotely., optical-module temperature/current/voltage/power, telemetry
Mechanical & Power
Slots Occupied
2 (compatible with the OTN DCI platform range)
Maximum Power Consumption
< 116 W (typical)
Ordering Information
Name
100G Coherent Muxponder, 2×10×10G to 2×100G (QSFP28/QSFP-DD) for DCI Chassis
Description
100G coherent muxponder card, 2 slots. Maps twenty 10G-class client services (20x SFP+ ports) onto two independent OTU4OTU4: Optical channel Transport UnitOTN framing level defined by ITU-T G.709 (OTU2 about 10.7G, OTU4 about 112G), with error correction and management overhead. line signals for full capacity, or ten clients onto one OTU4OTU4: Optical channel Transport UnitOTN framing level defined by ITU-T G.709 (OTU2 about 10.7G, OTU4 about 112G), with error correction and management overhead. line signal with intra-board 1+1 protection; line side takes QSFP28 grey or QSFP-DD DCODCO: Digital Coherent OpticsPluggable coherent module (e.g. CFP2-DCO) that embeds the coherent DSP. modules with C-band tunability; supports 10GbE, 25GbE, STMSTM: Synchronous Transport ModuleSDH rate levels: STM-1 155M, STM-4 622M, STM-16 2.5G, STM-64 10G.-64, Fibre Channel and OTU2OTU2: Optical channel Transport UnitOTN framing level defined by ITU-T G.709 (OTU2 about 10.7G, OTU4 about 112G), with error correction and management overhead./OTU2eOTU2e: Optical channel Transport UnitOTN framing level defined by ITU-T G.709 (OTU2 about 10.7G, OTU4 about 112G), with error correction and management overhead. services.