Skip to Content

400G Coherent Flex Muxponder, 4×100G or 1×400G to 400G (CFP2) for DCI Chassis

https://nexgen1.odoo.com/web/image/product.template/10525/image_1920?unique=1911116

This 400G coherent Flex muxponder service card has a flexible client side: it either aggregates up to four 100GbE/OTU4 clients or carries one 400GbE client directly, onto a single 400G coherent line wavelength over a pluggable CFP2 DCO, with programmable 100G–400G line rate and full C-band tunability for metro and long-haul DCI transport. The single-slot card fits the OTN DCI platform range.

Flexible 4×100G or 1×400G client side

One flexible QSFP-DD/QSFP28-compatible port plus three fixed QSFP28 ports: use all four ports to aggregate up to four 100GbE/OTU4 clients, or the flexible port alone to carry one 400GbE client, onto a single 400G coherent line.

Programmable coherent line

A pluggable CFP2 DCO delivers programmable 100G–400G operation with C-band tunability (190.69375–196.65625 THz), flex-grid and adjustable launch power.

Flexible, service-rich client access

Client ports carry 100GbE, 100GbE FlexE, 400GbE and optional OTU4, including 100GbE/OTU4 hybrid transmission, with optional single-fibre bidirectional line transmission.

Deep performance visibility

Monitors line- and client-side performance and alarms, Ethernet RMON, optical-module health, optional ODU-layer delay measurement, and telemetry.

Compact single-slot footprint

A single-slot card compatible with both DCI chassis, drawing under 71 W with the optical module fitted.

Mode 14×100G client mode (aggregation, all four client ports populated with QSFP28 modules)

CLIENTLINE100GQSFP-DD/28100GQSFP28100GQSFP28100GQSFP28400G MuxponderCFP2400G

Mode 21×400G client mode (direct pass-through using the flexible QSFP-DD port only; the three QSFP28-only ports are unused)

CLIENTLINE400GQSFP-DD400GTransponderCFP2400G
CARD FOR DCI CHASSIS1 SLOT

0.00 kr 0.0 DKK 0.00 kr

This combination does not exist.

Line Side
Interface1 × CFP2 DCO, pluggable
Line Rate (Programmable)100G–400G
Tunable Range190.69375–196.65625 THz (C-band, flex-grid optional)
Output Power (Adjustable)Adjustable, range depends on optical module
Single-Fibre BidirectionalOptional
Client Side
Interfaces1 × QSFP-DD/QSFP28-compatible + 3 × QSFP28, pluggable
Client CapacityUp to 4 × 100G-equivalent, within the 400G line cap
Supported Services100GbE, 100GbE FlexE (unaware), 400GbE, OTU4 (optional), 100GbE/OTU4 hybrid (optional)
OAM & Monitoring
Latency MeasurementOnline delay measurement based on the ODU layer, line-side (optional)
LoopbackInner and outer loopback, line-side and client-side (optional)
LLDPReceive mode only (Ethernet service types)
ALSClient-side support, Ethernet service types (optional)
Alarm Delay InsertionLocal Fault alarm delay insertion with configurable delay time (optional)
Performance MonitoringLine- and client-side performance and alarm monitoring, Ethernet RMON, optical-module temperature/current/voltage/power, telemetry
Mechanical & Power
Slots Occupied1 (compatible with the OTN DCI platform range)
Maximum Power Consumption< 71 W (typical)
Name400G Coherent Flex Muxponder, 4×100G or 1×400G to 400G (CFP2) for DCI Chassis
Description400G coherent Flex muxponder card, 1 slot. Flexible client side: multiplexes up to 4x100GE/OTU4 or carries a single 400GbE client onto a single 400G coherent line (CFP2 DCO), programmable 100G-400G with C-band tunability and flex-grid; 1x QSFP-DD/QSFP28-compatible + 3x QSFP28 clients; supports 100GbE, 100GbE FlexE, 400GbE and OTU4 services.
Part NumberDCI-MP-CFP2-400G-4x100G-F-1S