400G Coherent Flex Muxponder, 4×100G or 1×400G to 400G (CFP2) for DCI Chassis
This 400G coherent Flex muxponder service card has a flexible client side: it either aggregates up to four 100GbE/OTU4 clients or carries one 400GbE client directly, onto a single 400G coherent line wavelength over a pluggable CFP2 DCO, with programmable 100G–400G line rate and full C-band tunability for metro and long-haul DCI transport. The single-slot card fits the OTN DCI platform range.
Highlights
Flexible 4×100G or 1×400G client side
One flexible QSFP-DD/QSFP28-compatible port plus three fixed QSFP28 ports: use all four ports to aggregate up to four 100GbE/OTU4 clients, or the flexible port alone to carry one 400GbE client, onto a single 400G coherent line.
Programmable coherent line
A pluggable CFP2 DCO delivers programmable 100G–400G operation with C-band tunability (190.69375–196.65625 THz), flex-grid and adjustable launch power.
Flexible, service-rich client access
Client ports carry 100GbE, 100GbE FlexE, 400GbE and optional OTU4, including 100GbE/OTU4 hybrid transmission, with optional single-fibre bidirectional line transmission.
Deep performance visibility
Monitors line- and client-side performance and alarms, Ethernet RMON, optical-module health, optional ODU-layer delay measurement, and telemetry.
Compact single-slot footprint
A single-slot card compatible with both DCI chassis, drawing under 71 W with the optical module fitted.
Functional Structure
Mode 14×100G client mode (aggregation, all four client ports populated with QSFP28 modules)
Mode 21×400G client mode (direct pass-through using the flexible QSFP-DD port only; the three QSFP28-only ports are unused)
Front Panel
Format
Specifications
| Interface | 1 × CFP2 DCO, pluggable |
| Line Rate (Programmable) | 100G–400G |
| Tunable Range | 190.69375–196.65625 THz (C-band, flex-grid optional) |
| Output Power (Adjustable) | Adjustable, range depends on optical module |
| Single-Fibre Bidirectional | Optional |
| Interfaces | 1 × QSFP-DD/QSFP28-compatible + 3 × QSFP28, pluggable |
| Client Capacity | Up to 4 × 100G-equivalent, within the 400G line cap |
| Supported Services | 100GbE, 100GbE FlexE (unaware), 400GbE, OTU4 (optional), 100GbE/OTU4 hybrid (optional) |
| Latency Measurement | Online delay measurement based on the ODU layer, line-side (optional) |
| Loopback | Inner and outer loopback, line-side and client-side (optional) |
| LLDP | Receive mode only (Ethernet service types) |
| ALS | Client-side support, Ethernet service types (optional) |
| Alarm Delay Insertion | Local Fault alarm delay insertion with configurable delay time (optional) |
| Performance Monitoring | Line- and client-side performance and alarm monitoring, Ethernet RMON, optical-module temperature/current/voltage/power, telemetry |
| Slots Occupied | 1 (compatible with the OTN DCI platform range) |
| Maximum Power Consumption | < 71 W (typical) |
Ordering Information
| Name | 400G Coherent Flex Muxponder, 4×100G or 1×400G to 400G (CFP2) for DCI Chassis |
| Description | 400G coherent Flex muxponder card, 1 slot. Flexible client side: multiplexes up to 4x100GE/OTU4 or carries a single 400GbE client onto a single 400G coherent line (CFP2 DCO), programmable 100G-400G with C-band tunability and flex-grid; 1x QSFP-DD/QSFP28-compatible + 3x QSFP28 clients; supports 100GbE, 100GbE FlexE, 400GbE and OTU4 services. |
| Part Number | DCI-MP-CFP2-400G-4x100G-F-1S |