Skip to Content

1.25G-11.3G Multi-Service 3R Transponder (4-Channel) for WDM Chassis

https://nexgen1.odoo.com/web/image/product.template/2959/image_1920?unique=9931463

In this multi-service 3R transponder, a dedicated on-board CDR chip performs genuine 3R regeneration, re-amplification, re-shaping and re-timing, on each of four independent 1.25G-11.3G channels before converting them to matching WDM line wavelengths, and reverses the process just as easily. The same eight SFP+ ports can be reconfigured as 8 independent unidirectional channels with interface-level loopback, and the card can also run in pure line-to-line 3R relay mode. The single-slot card fits across the OTN WDM chassis range.

True 3R regeneration

A dedicated on-board CDR chip re-amplifies, re-shapes and re-times every channel, not just the pluggable optics, for genuine end-to-end signal clean-up.

Multi-service, multi-rate

Four independent channels carry GE/10GE, 1/2/4/8/10G FC, STM-16/64 or CPRI-2/3/6/7, anywhere from 1.25G to 11.3G.

Flexible port configuration

Runs as 4 bidirectional channels, or reconfigures as 8 independent unidirectional channels with interface-level loopback.

Two operating modes, one card

Wavelength conversion between client and WDM line, or line-to-line 3R relay, using the same SFP+ slots.

Compact and power-efficient

Occupies a single slot across the full OTN WDM chassis range, drawing just 16 W with optical modules fitted.

Line mode (wavelength conversion)

CLIENTLINE4-Channel3R Transponder1/2/4/8/10G FCSFP+STM-16/64SFP+GE/10GESFP+CPRI 2/3/6/7SFP+SFP+10GSFP+10GSFP+10GSFP+10G

Relay mode (3R line-to-line regeneration)

CLIENTLINE4-Channel3R Relay10GSFP+10GSFP+10GSFP+10GSFP+SFP+10GSFP+10GSFP+10GSFP+10G
CARD FOR WDM CHASSIS1 SLOT

0.00 kr 0.0 DKK 0.00 kr

This combination does not exist.

Client Side
Interfaces4 × SFP+, pluggable (or 8 × unidirectional with interface-configured loopback)
Supported ServicesGE, 10GE · 1/2/4/8/10G FC · STM-16/64 · CPRI-2/3/6/7
Rate Range1.25G to 11.3G per channel
Line Side
Interfaces4 × SFP+, pluggable
Wavelength GridCWDM 18-wave or DWDM 96-wave @ 50 GHz
3R Regeneration
FunctionRe-amplification, re-shaping, re-timing (dedicated on-board CDR)
Applies toBoth Line mode and Relay mode
Operating Modes
Line Mode (Wavelength Conversion)4× bidirectional or 8× unidirectional service access, converted to matching WDM line wavelengths
Relay Mode (3R Regeneration)4× bidirectional or 8× unidirectional line-to-line relay, with full 3R signal clean-up
OAM & Monitoring
LoopbackLine-side and client-side
ALSAutomatic laser shutdown / restart on loss of input signal
Performance MonitoringOptical-module temperature, current, voltage, optical power
Mechanical & Power
Slots Occupied1 (compatible with all OTN WDM chassis)
Maximum Power Consumption16 W (with optical module)
Name1.25G-11.3G Multi-Service 3R Transponder (4-Channel) for WDM Chassis
DescriptionMulti-service 3R transponder, 1 slot. On-board CDR chip performs true 3R regeneration (re-amplify, re-shape, re-time) on four 1.25G-11.3G channels (GE/10GE, FC, STM-16/64, CPRI), converting to matching WDM line wavelengths or relaying line-to-line; 8x SFP+ ports, reconfigurable as 8 unidirectional; under 16W with optical modules.
Part NumberWDM-TP-4x10G-4x10G-3R-1S