Skip to Content

100G Transponder / Regenerator (3-Channel) for WDM Chassis

https://www.nexgen.eu/web/image/product.template/10426/image_1920?unique=9931463

This 100G transponder service card converts three 100GE or OTU4 client signals into three 100G (or six 50G) WDM wavelengths using pluggable 100G QSFP28 DCO coherent modules or 100G QSFP28 PAM4 DWDM modules on the line side. Beyond wavelength conversion, the same six-port card can also run in relay/regeneration mode, regenerating three 100G line signals end to end. The single-slot card fits across the OTN WDM chassis range.

Three 100G channels, one slot

Converts three independent 100GE or OTU4 clients into three WDM line wavelengths, or six 50G wavelengths, from a single one-slot card.

Coherent or PAM4, your choice

Line-side ports accept either 100G QSFP28 DCO modules for coherent, C-band-tunable long-haul reach, or 100G QSFP28 PAM4 DWDM modules for shorter, cost-optimised links.

Doubles as a line regenerator

The same six QSFP28 ports can be configured for 3×100G relay/regeneration, refreshing line signals across a network without a client-side hop.

Deep performance visibility

Monitors OSNR, pre-FEC and uncorrectable BER with DCO modules, or pre- and post-FEC BER with PAM4 DWDM modules, plus optical-module temperature, current, voltage and power.

Efficient power footprint

Draws just 60 W with coherent DCO modules, or as little as 30 W using PAM4 DWDM modules, keeping chassis power budgets predictable.

Transponder mode (wavelength conversion)

CLIENTLINE3×100GTransponder100GQSFP28100GQSFP28100GQSFP28QSFP28100G/2×50GQSFP28100G/2×50GQSFP28100G/2×50G

Regeneration mode (line-to-line refresh)

CLIENTLINE3×100GRegeneration100G/2×50GQSFP28100G/2×50GQSFP28100G/2×50GQSFP28QSFP28100G/2×50GQSFP28100G/2×50GQSFP28100G/2×50G
CARD FOR WDM CHASSIS1 SLOT

0.00 kr 0.0 DKK 0.00 kr

This combination does not exist.

Line Side
Interface3 × 100G QSFP28 DCO (coherent) or 100G QSFP28 PAM4 DWDM, pluggable
Line Rate (Programmable)100G
Tunable Range191.35–196.1 THz (C-band), with QSFP28 DCO modules
Output Power (Adjustable)Adjustable, range depends on optical module
Client Side
Interfaces3 × QSFP28, pluggable
Client Capacity3 × 100G
Supported Services100GE, 100GE RS-FEC, OTU4 (with QSFP28 DCO)
OAM & Monitoring
LoopbackSupported when using 100G QSFP28 DCO modules
ALSAutomatic laser shutdown / restart on optical signal input
Performance MonitoringOSNR, pre-FEC & uncorrectable BER (with QSFP28 DCO); pre-FEC & post-FEC BER (with QSFP28 PAM4 DWDM); optical-module temperature/current/voltage/power
Mechanical & Power
Slots Occupied1 (compatible with all OTN WDM chassis)
Maximum Power Consumption60 W (line mode, 100G QSFP28 DCO) / 30 W (line mode, 100G QSFP28 PAM4 DWDM)
Name100G Transponder / Regenerator (3-Channel) for WDM Chassis
Description100G transponder / regenerator, 1 slot. Supports three 100GE/OTU4 line-side wavelength conversions via 100G QSFP28 DCO (coherent, C-band tunable) or 100G QSFP28 PAM4 DWDM modules, plus 3x100G relay/regeneration mode; 6×QSFP28 ports total.
Part NumberWDM-TP-3x100G-3x100G-DCO-1S