Skip to Content

Optical Bypass Protection Card for WDM Chassis

https://www.nexgen.eu/web/image/product.template/10457/image_1920?unique=9931463

The OBP Optical Bypass Protection Card is an intelligent optical path switching system for pure optical network environments. It automatically identifies the power and optical output state of a network node and, if that node fails (power loss, hardware or software failure), instantly switches the communications line onto a bypass path around it, keeping the rest of the network connected instead of suffering a full outage at the fault point. Unlike OLP (which protects against a fibre line degradation or break), OBP protects against the failure of the inline node itself.

Automatic node bypass

Detects a failed local node (power/HW/SW) and instantly reroutes traffic around it.

Fast switching

Switches to the bypass path in under 40ms.

Low insertion loss

Under 0.8dB introduction loss on the protected path.

Real-time network management

Real-time optical power monitoring and active switch scheduling.

Station A Station C West O D F East O D F 1:1 optical bypass protection R3 T1 T3 R1 R2 T4 T2 R4 Station B RX TX TX RX If Station B fails, the switch pairs connect West and East directly (blue), bypassing it entirely.
CARD FOR WDM CHASSIS1 SLOT

0.00 kr 0.0 DKK 0.00 kr

This combination does not exist.

Optical
Product ModelOBPB (1:1)
Work Wavelength Range1260–1650nm
Switching Time<40ms
Introduction Loss<0.8dB
Monitoring of Optical Power Range−50dBm to +25dBm
Management & Mechanical
Network Management FunctionReal-time monitoring of OBP optical power, active switch scheduling
Occupied Slot Number1 (compatible with all OTN WDM chassis)
Optical InterfaceLC
Typical Power Consumption5W
MTBF>100000 hours
NameOptical Bypass Protection Card for WDM Chassis
DescriptionOBP Optical Bypass Protection Card, intelligent optical path switching, 1:1, automatically bypasses a failed inline network node (power/HW/SW failure) at the optical layer. <40ms switching, <0.8dB introduction loss, real-time optical power monitoring.
Part NumberWDM-OBP-1S