Skip to Content

Optical Terminal Amplifier Card for DCI Chassis

https://nexgen1.odoo.com/web/image/product.template/10528/image_1920?unique=9931463

The Optical Terminal Amplifier Card for DCI Chassis is a variable-gain terminal amplifier for optical terminal stations (OTM): a Booster (BA) amplifies the combined multiplexed signal toward the line, and a Pre-amplifier (PA) pre-amplifies the demultiplexed signal on receive. Available in four gain/band configurations - OTA-25, OTA-35, OTA-25U and OTA-35U - covering the extended C-band or the ultra-wide C-band, with gain set to AGC or APC mode and adjusted continuously within range.

Four gain/band configurations

OTA-25/OTA-35 cover the extended C-band (1528–1568nm); OTA-25U/OTA-35U cover the ultra-wide C-band (1524–1572.3nm) with higher output power and different noise/slope figures.

Continuously adjustable gain

BA and PA stages each set to AGC (automatic gain control) or APC (automatic power control) mode, with gain adjustable throughout the stated range rather than fixed steps.

BA + PA terminal duplex

A fixed Booster + Pre-amplifier pair, matched to an OTM site: BA boosts the outgoing combined signal, PA pre-amplifies the incoming signal before demultiplexing.

Built-in OSC, MON and OTDR

Standard optical supervisory channel, MON tap (21–23dB split) and OTDR monitoring port (1625nm) on both BA and PA paths, for DCN communication and fibre diagnostics.

VOA on the receive path

A variable optical attenuator (0–15dB, <1dB insertion loss) sits ahead of the PA input on every configuration; the BA path has no VOA.

Automatic power reduction

Supports APR (automatic power reduction) for laser safety on fibre break, on all four configurations.

SIG(BA-IN) BA LINE(BA-OUT) LINE(PA-IN) PA SIG(PA-OUT) OSC-AD OSC MON(PA-OUT) MON(BA-OUT) OTDR(BA-OUT) OTDR(PA-IN)
CARD FOR DCI CHASSIS2 SLOTS

0.00 kr 0.0 DKK 0.00 kr

  • Model

This combination does not exist.

Common to All Configurations
SpecificationAll models
Working ModeAGC or APC, settable (BA and PA)
Gain Flatness<1.5dB
Polarization Dependent Loss<0.5dB
Gain Stability±0.5dB
Reflection Coefficient<-30dB
MON PortStandard, 0.5% splitting ratio (21–23dB), BA and PA
OTDR Monitoring Channel1625nm, <1dB channel loss, BA and PA
VOAPA input only (not fitted on BA), <1dB insertion loss, 0–15dB adjustment range
SafetyAutomatic power reduction (APR) on fibre break
Slots Occupied2 (compatible with the OTN DCI platform range)
By Configuration
Specification253525U35U
BandExtended CExtended CUltra-wide CUltra-wide C
Wavelength Range1528–1568nm1528–1568nm1524–1572.3nm1524–1572.3nm
Max. Total Output Power≥21dBm≥21dBm≥23dBm≥21dBm
Gain Slope-3 to 0dB-3 to 0dB-5 to 1dB-5 to 1dB
Output Power Detection Range-2 to 22dBm-2 to 22dBm-5 to 23.5dBm*-5 to 23.5dBm*
OSC Operating Rate1.25Gb/s155Mb/s1.25Gb/s155Mb/s
Booster (BA)
Gain Range8–18dB8–18dB8–18dB8–18dB
Noise Figure
GainNF
8≤12.5
12≤9.1
16–18≤6.5
GainNF
8≤12.5
12≤9.1
16–18≤6.5
GainNF
8≤14.2
13≤9.5
18≤7.2
GainNF
8≤14.2
13≤9.5
18≤7.2
Input Power Detection Range-18 to 13dBm-18 to 13dBm-19 to 15dBm-19 to 15dBm
Pre-amplifier (PA)
Gain Range15–25dB22–35dB15–25dB22–35dB
Noise Figure
GainNF
15≤8.1
16≤7.3
17≤6.6
19≤6.4
20–22≤5.8
23–25≤5.5
GainNF
22≤8
24≤7
25≤6.1
27≤5.9
28–35≤5.5
GainNF
15≤10.2
20≤6.7
25≤5.5
GainNF
22≤8.8
27≤6.8
35≤5.8
Input Power Detection Range-28 to 6dBm-35 to 0dBm-26 to 8dBm-33 to 1dBm
NameOptical Terminal Amplifier Card for DCI Chassis
DescriptionOTA variable-gain terminal amplifier card, 2 slots. Booster (BA, 8-18dB adjustable) and Pre-amplifier (PA, 15-25dB or 22-35dB adjustable) duplex pair for optical terminal stations (OTM), AGC/APC settable; available in extended C-band (1528-1568nm) or ultra-wide C-band (1524-1572.3nm, higher output power); standard OSC, MON and OTDR monitoring, VOA on the PA input, APR safety.
Part NumberDCI-OTA-{Model}-2S
{Model}25 · 35 · 25U · 35U, required - number sets the PA gain family (25 = 15–25dB, 35 = 22–35dB); optional U suffix selects the ultra-wide C-band version (higher output power, different noise/slope)