Skip to Content

Open Line System

https://www.nexgen.eu/web/image/product.template/10464/image_1920?unique=9931463

The OLS is a 1U open line system that provides the complete DWDM optical layer of a point-to-point data-centre interconnect in a single plug-and-play box: 48-channel C-band multiplexing and demultiplexing, optical amplification, automatic power equalisation and level control, an in-band optical supervisory channel and OTDR fibre monitoring. Open and transparent to the signal format, it carries coloured DWDM pluggables plugged straight into switches and routers (IP over DWDM), as well as third-party transponders and muxponders. Three models cover dispersion-compensated links for NRZ and PAM4 signals, line-protected coherent links and extended-reach coherent links.

All-in-one 1U open line system

Multiplexing and demultiplexing, amplification, power control and supervisory channel in one 1U 19-inch box, replacing a stack of separate line elements.

Built-in fibre monitoring

Integrated OTDR on the line: fibre distance measurement, fault location and performance anomaly localisation, without external test equipment.

Any DWDM signal format

NRZ (1–32G), PAM4 (40G/100G) and coherent QPSK, 8QAM and 16QAM up to 400G, depending on model.

Zero-touch provisioning

Auto-configuration, automatic per-channel power equalisation on the client side and automatic level control on the line side: as simple to deploy as a passive multiplexer.

Automatic dispersion compensation

On the dispersion-compensated model, automatic fibre distance measurement drives a tunable compensator combined with a fixed DCM, so NRZ and PAM4 signals run over metro links without manual tuning.

Optional 1+1 line protection

The line-protected model duplicates the line onto two fibre routes and switches to the backup route when the working route fails.

In-band management

OSC in-band supervisory channel manages the remote end over the fibre itself; Web GUI, B/S centralised management, open SNMP interface and front-panel LCD.

Redundant power and cooling

Serviced from the rear panel: one or two hot-swappable power supply units (AC, DC, or high-voltage DC through the AC unit), 1+1 with load sharing, and 1+1 hot-swappable fans with front-to-back airflow.

TDC80Dispersion-compensated: NRZ, PAM4 and coherent, 80km

A fixed DCM ahead of the booster pre-compensates the transmitted multiplex, and a tunable dispersion compensator (TDC) after the pre-amplifier removes the residual dispersion before demultiplexing; the compensation is set automatically. A VOA ahead of each amplifier sets the line level.

λ1 λ2 λ48 ⋮ λ1 λ2 λ48 ⋮ VMux Demux DCM TDC VOA VOA BA PA OCM OSC OTDR Line_TX Line_RX

OLP80Line-protected: coherent, 1+1 optical line protection, 80km

No dispersion compensation: coherent receivers compensate dispersion electronically. One booster and pre-amplifier pair serves both fibre routes; the OLP switch on the line side feeds the signal to both routes and selects the better received route, protecting against a fibre cut.

λ1 λ2 λ48 ⋮ λ1 λ2 λ48 ⋮ VMux Demux VOA VOA BA PA OCM OSC OTDR OLP Line1_TX Line1_RX Line2_TX Line2_RX

COH120Extended reach: coherent, 120km

Same optical path as the line-protected model without the OLP switch, on a single fibre pair: VOA and amplifier on each direction, channel monitoring (OCM) on both, in-band supervisory channel (OSC) on the line.

λ1 λ2 λ48 ⋮ λ1 λ2 λ48 ⋮ VMux Demux VOA VOA BA PA OCM OSC OTDR Line_TX Line_RX
Switch / Router IP over DWDM Switch / Router IP over DWDM Switch / Router Client optics (SR4, LR4, ...) DWDM DWDM NRZ, PAM4, Coherent Muxponder /Transponder Coherent OLS Switch / Router IP over DWDM Switch / Router IP over DWDM Switch / Router Client optics (SR4, LR4, ...) DWDM DWDM NRZ, PAM4, Coherent Muxponder /Transponder Coherent OLS Dual fibreup to 120km,depending on model 2nd fibre pair,line-protected model Coloured DWDM pluggables in switches and routers, or muxponders and transponders, connect directly to the OLS at each end;the two OLS units carry all channels over one fibre pair, or two on the line-protected model.
1U

0.00 kr 0.0 DKK 0.00 kr

  • Model
  • Power Supply Unit

This combination does not exist.

Optical & Capacity
Number of Optical Channels48 channels, C-band, 100GHz spacing
Center Frequency191.40–196.10THz
Signal FormatsNRZ, PAM4 and coherent, depending on model (see Variant Options)
Client-Side Power ControlAutomatic per-channel power equalisation · per-channel input/output optical power monitoring and indicator lights
Line-Side Power ControlAutomatic level control of the main channel · main-channel optical power monitoring and indicator lights
Supervisory ChannelIn-band OSC
Fibre MonitoringBuilt-in OTDR: fibre distance measurement, fault location and performance anomaly localisation
Front & Rear Panels
Optical InterfaceFront panel, all ports LC
Management PortRear panel: 2×10/100/1000M RJ45 · 1×USB Type-C local debug serial port
Management StyleWeb GUI · B/S centralised management · open SNMP interface
O&MFront-panel LCD display
Power & Mechanical
Device Size1U: 44mm (H) × 440mm (W) × 600mm (D)
Power Supply1 or 2 hot-swappable units on the rear panel, 1+1 backup with load sharing · AC 100–130V / 200–240V, 50/60Hz (max range 90–264V, 47–63Hz); the AC unit also accepts high-voltage DC 192–288V · DC −40 to −72V
Heat DissipationHot-swappable fans on the rear panel, 1+1 backup, front-to-back airflow
Power Consumption<150W
Operating Temperature−5°C–55°C (typical)
Operating Humidity5%–85%, non-condensing
FeatureTDC80OLP80COH120
NRZ (1–32G)✓––
PAM4 (40G/100G)✓––
Coherent 100G QPSK✓✓✓
Coherent 200G 16QAM✓✓✓
Coherent 200G 8QAM–✓✓
Coherent 200G QPSK–✓✓
Coherent 300G 8QAM–✓✓
Coherent 400G 16QAM–✓✓
Automatic Dispersion CompensationTDC + DCM––
Line Protection–OLP 1+1–
Transmission Distance80km80km120km
Link Budget22dB16dB (OFEC)24dB (OFEC)
NameOpen Line System
DescriptionOLS, 1U open line system for 48-channel C-band DWDM (100GHz), integrating multiplexing/demultiplexing, optical amplification, automatic power equalisation and level control, in-band OSC and OTDR fibre monitoring. Three models: dispersion-compensated (NRZ, PAM4 and coherent), line-protected coherent, and extended-reach coherent.
Part NumberWDM-OLS-{Model}-{PSU}-1U
{Model}
CodeMeaning
TDC80Dispersion-compensated: automatic dispersion compensation (TDC + DCM), NRZ, PAM4 and coherent formats, 80km
OLP80Line-protected: coherent formats, 1+1 optical line protection, 80km
COH120Extended reach: coherent formats, 120km
Required. See Variant Options above for the signal formats, distance and link budget of each model.
{PSU}
CodeMeaning
DCOne DC power supply unit
ACOne AC power supply unit (also accepts high-voltage DC)
ADOne DC + one AC unit, mixed
2DTwo DC units, 1+1 redundant
2ATwo AC units, 1+1 redundant
Required. Two units (1+1) are recommended.