EDFA Card for WDM Chassis
The EDFA Card for WDM Chassis is an erbium-doped fibre amplifier that compensates signal power loss across the transmission link. It amplifies channels across the C-band with flat gain and a low noise figure. Available as a single-stage or dual-stage card, with an optional built-in VOA for network-managed attenuation.
Highlights
Multi-channel C-band amplification
Amplifies up to 48 channels at 100GHz spacing or 96 channels at 50GHz spacing simultaneously, with flat gain across the band.
Configurable single or dual amplification
The same card design can be configured as a single amplification stage or combined into a dual-stage card, matched to where it sits in the link.
Customisable gain and output power
Gain and saturated output power are configured to match the application's power budget, talk to us about the available range.
Optional built-in VOA
Network-managed variable optical attenuator, adjustable from 0 to 20dB, ahead of the first amplification stage.
Low noise, flat gain
≤5.5dB noise figure and ≤1.5dB gain flatness maintained on every stage across all configurations.
Extended wavelength range
Conventional 1529–1561nm (40/80 waves) or extended 1528–1568nm (48/96 waves) operating windows.
Functional Structure
Format
Specifications
| Optical | |||
|---|---|---|---|
| Operating Wavelength Range | Conventional: 1529–1561nm (40 waves @100GHz or 80 waves @50GHz) Extended: 1528–1568nm (48 waves @100GHz or 96 waves @50GHz) | ||
| Gain Flatness | ≤1.5dB | ||
| Noise Figure | ≤5.5dB | ||
EDFA ConfigurationOther configurations available on request | |||
| ID | E2017 | E2025 | E2030 |
| Minimum Input Optical Power | -26dBm | -34dBm | -39dBm |
| Saturated Output Optical Power | +20dBm | +20dBm | +20dBm |
| Rated Gain | 17dB (±3 adjustable) | 25dB (±3 adjustable) | 30dB (±3 adjustable) |
| Options | |||
| VOA | Optional built-in variable optical attenuator, 0–20dB, network-managed. | ||
| Dual EDFA | Optional second EDFA stage on the same card, same configuration range as above (e.g. booster + preamp pairing). | ||
| Management & Mechanical | |||
| Network Management | Real-time monitoring of EDFA operating status: optical power, pump current, temperature | ||
| Slots Occupied | 1 (compatible with all OTN WDM chassis) | ||
| Optical Interface | LC/UPC | ||
| Maximum Power Consumption | 15W | ||
Ordering Information
| Name | EDFA Card for WDM Chassis |
| Description | EDFA optical amplifier board, 1 slot. Erbium-doped fibre amplifier compensating signal power in the transmission link; amplifies channels across the C-band with flat gain and low noise figure. Available in single-stage and dual-stage configurations, with an optional built-in VOA for network-managed attenuation. |
| Part Number | WDM-EDFA-{Configuration ID}[-{Secondary Configuration ID}][-V]-1S |
| {Configuration ID} | E2017 · E2025 · E2030 (other configurations available on request), required |
| [-{Secondary Configuration ID}] | omitted for an EDFA · present for a Dual EDFA (same values as {Configuration ID}) |
| [-V] | omitted = Without VOA · present = With VOA |
Netceed