Skip to Content

OTDR Card for DCI Chassis

https://nexgen1.odoo.com/web/image/product.template/4080/image_1920?unique=9931463

An optical fibre is invisible from the outside - if it develops a bend, a bad splice, or a break somewhere along its length, there is no way to see where. The Optical Time Domain Reflectometer (OTDR) card solves this by sending a short pulse of light down the fibre and listening for the faint light that reflects and scatters back at every imperfection along the way. By timing how long each reflection takes to return, the card builds a precise map of the fibre: exactly how long it is, where any splices or connectors sit, how much loss each one introduces, and where a break has occurred. It does this for up to 8 separate fibre links, one at a time, without needing a technician on site with a handheld tester.

When a fibre fault happens, the difference between minutes and hours of downtime often comes down to how fast the fault can be located. Sending a technician out to walk a fibre route with a handheld OTDR is slow, and by the time they arrive the evidence of an intermittent problem may be gone. With this card built into the chassis, the network management system can trigger a scan on any of the 8 monitored links on demand and get back an exact distance to the fault straight away - turning "somewhere along a 40km route" into "at the 23.4km mark," which is the difference between a long night of searching and a short truck roll to the right manhole.

8 fibre links, one OTDR engine

An internal 1×8 optical switch selects one of 8 fibre links at a time and feeds it to a single shared OTDR engine.

Fault location

Distance accuracy <20m over a maximum detection distance of ≥80km.

High dynamic range

≥30dB dynamic range for reliable detection even on long or lossy links.

Fine event resolution

Event blind spot <10m and attenuation blind area <20m, for locating closely-spaced splices and connectors.

Adjustable pulse width

0.02–20μs pulse width range, to balance resolution against reach depending on the link under test.

Non-service-affecting

Tests fibre links independently of the live traffic wavelengths, at 1625nm.

OTDROTDR1(IN)OTDR2(IN)OTDR3(IN)OTDR4(IN)OTDR5(IN)OTDR6(IN)OTDR7(IN)OTDR8(IN)

The internal 1×8 optical switch selects one of the 8 fibre test links (OTDR1–OTDR8) at a time and routes it to the shared OTDR engine.

CARD FOR DCI CHASSIS1 SLOT

0.00 kr 0.0 DKK 0.00 kr

This combination does not exist.

FunctionTesting of optical fibre link distance, attenuation, total loss and other parameters
Slots Occupied1
Test Ports8 test interfaces, selected by an internal optical switch
Working Wavelength1625nm
Dynamic Range≥30dB
Pulse Width Range0.02–20μs
Maximum Detection Distance≥80km
Loss Test Accuracy±0.5dB
Distance Test Accuracy<20m
Event Blind Spot<10m
Attenuation Blind Area<20m
Scan Times>109
NameOTDR Card for DCI Chassis
DescriptionOptical time domain reflectometer (OTDR) card, 1 slot. Tests fibre link distance, attenuation and total loss across 8 fibre links selected by an internal 1x8 optical switch. 1625nm, ≥30dB dynamic range, <20m distance accuracy, ≥80km max detection distance, <10m event blind spot.
Part NumberDCI-OTDR-1S