Skip to Content

10G Muxponder, 8×2.5G to 2×10G (SFP+) for DCI Chassis

https://nexgen1.odoo.com/web/image/product.template/10526/image_1920?unique=9931463

This enhanced 8-channel, arbitrary-rate service aggregation and wavelength conversion card converts Any service (125 Mbit/s to 10.51 Gbit/s) to OTU2(e), across three working modes: a single 10G client to a single OTU2/OTU2e line, eight 2.5G clients to two independent OTU2 lines for full capacity, or four 2.5G clients to one OTU2 line with intra-board 1+1 protection. The single-slot card fits the OTN DCI platform range.

Three working modes

Runs as 1×10G to 1×OTU2/OTU2e, as 8×2.5G to 2×OTU2 for maximum capacity, or as 4×2.5G to 1×OTU2 with intra-board 1+1 protection.

Truly any-rate clients

Eight SFP/SFP+ client ports each accept any service from 125 Mbit/s to 10.51 Gbit/s, independent of protocol.

Broad low-rate service support

Carries FE, GbE, 10GbE, STM-1/4/16/64, Fibre Channel up to 1200, and OTU1/OTU2/OTU2e.

Deep performance visibility

Monitors line- and client-side performance and alarms, Ethernet RMON, optical-module health, ODU-layer delay measurement, and telemetry.

Compact, low-power footprint

A single-slot card compatible with both DCI chassis, drawing under 35 W with the optical modules fitted.

Mode 11×10G Any client mode (single client and single line port, remaining ports unused)

CLIENTLINE10GSFP/SFP+OTU2MuxponderSFP+10G

Mode 28×2.5G Any client mode (full capacity, two independent OTU2 line channels, no protection)

CLIENTLINE4×2.5GSFP/SFP+OTU2MuxponderCH1SFP+10G4×2.5GSFP/SFP+OTU2MuxponderCH2SFP+10G

Mode 34×2.5G Any client mode, intra-board 1+1 protection (half the client ports vs. the full-capacity mode; the second line port carries a protected copy of the same OTU2 signal instead of independent capacity)

CLIENTLINE4×2.5GSFP/SFP+OTU2MuxponderOTU2 (active)10GOTU2 (protect)10G1+1 PROTECTED
CARD FOR DCI CHASSIS1 SLOT

0.00 kr 0.0 DKK 0.00 kr

This combination does not exist.

Line Side
Interfaces2 × SFP+, hot-swappable
Line Rate10G per port (OTU2/OTU2e)
Client Side
Interfaces8 × SFP/SFP+, hot-swappable
Supported ServicesFE, GbE, 10GbE, STM-1, STM-4, STM-16, STM-64, Fibre Channel 100/200/800/1200, OTU1, OTU2, OTU2e
Working Mode1×10G Any to 1×OTU2/OTU2e · 8×2.5G Any to 2×OTU2 · 4×2.5G Any to 1×OTU2 (intra-board 1+1 protection)
OAM & Monitoring
Latency MeasurementOnline delay measurement based on the ODU layer, line-side
LoopbackInner and outer loopback, line-side and client-side
ALSClient-side support, non-OTN service types
Intra-Board 1+1 ProtectionSupported in 4×2.5G Any to 1×OTU2 working mode
Performance MonitoringLine- and client-side performance and alarm monitoring, Ethernet RMON, optical-module temperature/current/voltage/power, telemetry
Mechanical & Power
Slots Occupied1 (compatible with the OTN DCI platform range)
Maximum Power Consumption< 35 W (typical)
Name10G Muxponder, 8×2.5G to 2×10G (SFP+) for DCI Chassis
Description10G muxponder card, 1 slot. Enhanced 8-channel arbitrary-rate service aggregation and wavelength conversion, converting Any service (125 Mbit/s - 10.51 Gbit/s) to OTU2(e); 8x SFP/SFP+ clients, 2x SFP+ line ports; supports FE, GbE, 10GbE, STM-1/4/16/64, Fibre Channel up to 1200, and OTU1/OTU2/OTU2e, across three working modes including intra-board 1+1 protection.
Part NumberDCI-MP-SFP-2x10G-8x2.5G-1S