Skip to Content

200G Coherent Muxponder, Mixed 100G/10G Clients to 200G (CFP2) for DCI Chassis

https://nexgen1.odoo.com/web/image/product.template/4075/image_1920?unique=9df9ffc

This 200G coherent muxponder service card multiplexes a mix of 10G–100G-class client services, over 2 QSFP28 and 10 SFP+/SFP28 ports, onto a single 200G coherent line wavelength over a pluggable CFP2 DCO, with full C-band tunability for metro and long-haul DCI transport. The two-slot card fits the OTN DCI platform range.

Any-rate client aggregation

Two QSFP28 and ten SFP+/SFP28 client ports carry any mix of 10GbE to 100GbE, SDH, Fibre Channel and OTN services onto a single 200G coherent line.

Long-haul coherent reach

A pluggable CFP2 DCO delivers C-band tunability (190.7–196.65 THz), optional flex-grid and adjustable launch power.

Broad service support

Carries 10/25/40/100GbE, 100GbE FlexE, STM-64, 10GbE_WAN, Fibre Channel up to 3200, and OTU2/OTU2e/OTU4.

Deep performance visibility

Monitors line- and client-side performance and alarms, Ethernet RMON, optical-module health, optional ODU-layer delay measurement, and telemetry.

High client-port density

Twelve hot-swappable client ports on a two-slot card, drawing under 110 W with the optical module fitted.

Mode 12×100G client mode (both QSFP28 ports populated, full 200G line utilization)

CLIENTLINE100GQSFP28100GQSFP28200G MuxponderCFP2200G

Mode 21×100G + 10×10G client mode (mixed, one QSFP28 port plus all ten SFP+/SFP28 ports, full 200G line utilization)

CLIENTLINE100GQSFP2810×10GSFP+/28200G MuxponderCFP2200G

Mode 32×40G + 10×10G client mode (mixed, both QSFP28 ports at 40G plus all ten SFP+/SFP28 ports, full 200G line utilization)

CLIENTLINE40GQSFP2840GQSFP2810×10GSFP+/28200G MuxponderCFP2200G
CARD FOR DCI CHASSIS2 SLOTS

0.00 kr 0.0 DKK 0.00 kr

This combination does not exist.

Line Side
Interface1 × CFP2 DCO (200G/400G-rated module), pluggable
Line Rate200G
Tunable Range190.7–196.65 THz (C-band, flex-grid optional)
Output Power (Adjustable)Adjustable, range depends on optical module
Single-Fibre BidirectionalOptional
Client Side
Interfaces2 × QSFP28 + 10 × SFP+/SFP28, hot-swappable
Client CapacityUp to 2 × 100G + 10 × 10G, within the 200G line cap
Supported Services10GbE, 25GbE, 40GbE, 100GbE, 100GbE FlexE (unaware), STM-64, 10GbE_WAN, Fibre Channel 800/1600/3200, OTU2, OTU2e, OTU4
OAM & Monitoring
Latency MeasurementOnline delay measurement based on the ODU layer, line-side (optional)
LoopbackInner and outer loopback, line-side and client-side (optional)
LLDPReceive mode only, Ethernet service types (optional)
ALSClient-side support, Ethernet service types (optional)
Performance MonitoringLine- and client-side performance and alarm monitoring, Ethernet RMON, optical-module temperature/current/voltage/power, telemetry
Mechanical & Power
Slots Occupied2 (compatible with the OTN DCI platform range)
Maximum Power Consumption< 110 W (typical)
Name200G Coherent Muxponder, Mixed 100G/10G Clients to 200G (CFP2) for DCI Chassis
Description200G coherent muxponder card, 2 slots. Multiplexes a mix of 10G-100G-class client services (2x QSFP28 + 10x SFP+/SFP28 ports) onto a single 200G coherent line (CFP2 DCO) with C-band tunability and optional flex-grid; supports 10/25/40/100GbE, STM-64, Fibre Channel and OTU2/OTU2e/OTU4 services.
Part NumberDCI-MP-CFP2-200G-MIX-2S